Salisbury 4544 NCV 230kV Self-Testing Voltage Detector (Audio/ Visual) - Ansac Technology

Cart 0
Products

Salisbury 4544 NCV 230kV Self-Testing Voltage Detector (Audio/ Visual)

Enquiry Item

The Salisbury 4544 is a non-contact high voltage detector for use in applications for voltages from 240V to 230kV. It is intended for use in verifying the live or de-energized status of conductors, bus bars, and other types of exposed electrical equipment. This detector alarms (audio/ visual) in the proximity of electric fields and it is not necessary to make physical contact.


Qty

Salisbury 4544 NCV 230kV Self-Testing Voltage Detector (Audio/ Visual)

New AUTOMATIC and CONTINUOUS SELF TESTING circuitry eliminates any  concerns that the  tester may not be functioning properly

Overhead Ranges: Off/ 240V/ 4.2kV, 15kV, 25kV, 35kV, 46kV, 69kV, 115kV, 230kV (switch selectable)

Self-Testing Voltage Detectors are used to verify live or de-energized conductors. These testers may be used with rubber insulating gloves or hot sticks using the splined universal end fitting. Testers indicate the presence of voltage with an extra bright LED light and a distinctive audible signal. It is recommended that the tester be moved closer to the conductor until a warning is indicated, or it touches the conductor, apparatus, or elbow test point. Each tester requires three ā€œCā€ batteries (included).

  • Used to verify live or de-energized conductors  prior to performing electrical work
  • Automatic Self-Testing circuit will verify that detector is functioning properly by an intermittent flash and beep - no need to use a seperate test method
  • Tester is moved progressively closer to conductor or apparatus until warning of voltage is indicated or until it touches conductor, apparatus, or test point
  • Audio and visual indicator and sensitivity attenuator
  • For use with rubber insulating gloves and universal-spline hot sticks
Weight5.000000
Product IncludesVoltage Detector and Three 'C' Batteries
Specifications

Overhead Ranges: Off/ 240V/ 4.2kV, 15kV, 25kV, 35kV, 46kV, 69kV, 115kV, 230kV (switch selectable)

Detectors should be used in conjuction with ASTM d-120 specification rubber gloves and ASTM F-711 hotsticks.

Power SupplyThree 'C' Batteries
ManufacturerSalisbury
MPN4544

Write a review

Note: HTML is not translated!
    Bad           Good